Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS at a glance

Qwen Audio 3.1 TTS Plus and Qwen Audio 3.1 TTS are both Alibaba Cloud models in the Audio Generation category, available through the EmpirioLabs API.

Key differences

• Qwen Audio 3.1 TTS Plus is the newer release (Oct 21, 2026); Qwen Audio 3.1 TTS was released on Sep 23, 2026.
• Capabilities listed only for Qwen Audio 3.1 TTS: low latency.

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS: specs

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS: API pricing

Live rates from the EmpirioLabs catalog for both models. Each rate card always matches what the API charges.

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS: API parameters

Request parameters each model lists on EmpirioLabs, with the allowed values or range where one applies. A dash marks a parameter the model does not list.

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS: limits and notes

Qwen Audio 3.1 TTS Plus

Voices

• 4 voices that read Chinese, English, and other languages: longanlingxin_v3.1, longanhuan_v3.1, and longanfengyue_v3.1 are female, and xunanchuan_v3.1 is male.
• Every voice id ends in _v3.1, for example longanlingxin_v3.1.

Custom voices

• Set voice to custom and pass voice_audio_url, an https URL to 10 to 20 seconds of clear speech from one speaker.
• WAV, MP3, M4A, OGG, WEBM and FLAC are accepted, up to 15 MB. Record in a quiet room, without music or other voices.
• The response includes voice_id and voice_id_expires_at. Pass the voice_id as voice to reuse the voice for 7 days, on POST /v1/audio/speech, POST /v1/audio/speech:stream or the realtime socket, where session.update takes the same fields and session.updated returns the voice_id. Only the account that created it can use it, on this model only.
• Each account can hold 10 custom voices on this model at a time.
• GET /v1/voices?model=qwen-audio-3-1-tts-plus lists the model's voices, including your custom voices with their ids. Add type=custom to list custom voices alone.
• DELETE /v1/voices/{voice_id}?model=qwen-audio-3-1-tts-plus deletes a custom voice, which frees its place at once.
• In the Playground, set Voice to Custom to use a saved voice again, copy its id, or delete it.
• Creating, listing and deleting custom voices adds no charge.

Delivery direction

• instruction sets emotion, tone, character, pace, and speaking style in natural language, up to 1,000 characters.
• Inline tags inside the text change the delivery from that point, for example [excited] or [whispers], or add a one-time sound such as [laughing] or [sighing]. The full list of tags is on the input parameter.
• SSML input is not supported.

Input limits

• Up to 10,000 characters per request.
• language_hints biases pronunciation for mixed-language text.

Output

• MP3, WAV, PCM, or Opus at 8,000 to 48,000 Hz.
• POST /v1/audio/speech:stream sends audio chunks while the speech is generated.

Realtime

• WEBSOCKET /v1/realtime?model=qwen-audio-3-1-tts-plus takes text while it is still being written and returns audio as it is generated. Send input_text_buffer.append events, then input_text_buffer.commit, or session.finish to end the session.
• Audio arrives in response.audio.delta events: 16-bit PCM at 24,000 Hz by default, or MP3 or Opus. Set the voice, instruction, format and other options with session.update; a change applies from the next segment.
• Text is spoken in segments that end at sentence boundaries, and each segment ends with a response.done event carrying its usage.

Billing

• Billed per character of the input text. A Chinese character counts as two characters, and inline tags count as characters. The instruction is not billed.
• On the realtime socket each segment is billed for its own characters.

Qwen Audio 3.1 TTS

Voices

• 19 voices: 15 English voices and 4 multilingual voices. Emily, Luna, Eric, and Luca have British accents. Abby, Annie, Ava, Beth, Betty, Cally, Cindy, Donna, Andy, Brian, and David have American accents. The multilingual voices longanhuan_v3.1, longanlingxin_v3.1, longanfengyue_v3.1, and xunanchuan_v3.1 read Chinese, English, and other languages.
• Every voice id ends in _v3.1, for example Emily_v3.1.

Custom voices

• Set voice to custom and pass voice_audio_url, an https URL to 10 to 20 seconds of clear speech from one speaker.
• WAV, MP3, M4A, OGG, WEBM and FLAC are accepted, up to 15 MB. Record in a quiet room, without music or other voices.
• The response includes voice_id and voice_id_expires_at. Pass the voice_id as voice to reuse the voice for 7 days, on POST /v1/audio/speech, POST /v1/audio/speech:stream or the realtime socket, where session.update takes the same fields and session.updated returns the voice_id. Only the account that created it can use it.
• Each account can hold 10 custom voices on this model at a time.
• GET /v1/voices?model=qwen-audio-3-1-tts lists the model's voices, including your custom voices with their ids. Add type=custom to list custom voices alone.
• DELETE /v1/voices/{voice_id}?model=qwen-audio-3-1-tts deletes a custom voice, which frees its place at once.
• In the Playground, set Voice to Custom to use a saved voice again, copy its id, or delete it.
• Creating, listing and deleting custom voices adds no charge.

Delivery direction

• instruction sets emotion, tone, character, pace, and speaking style in natural language, up to 1,000 characters.
• Inline tags inside the text change the delivery from that point, for example [excited] or [whispers], or add a one-time sound such as [laughing] or [sighing]. The full list of tags is on the input parameter.
• SSML input is not supported.

Input limits

• Up to 10,000 characters per request.
• language_hints biases pronunciation for mixed-language text.

Output

• MP3, WAV, PCM, or Opus at 8,000 to 48,000 Hz.
• POST /v1/audio/speech:stream sends audio chunks while the speech is generated.

Realtime

• WEBSOCKET /v1/realtime?model=qwen-audio-3-1-tts takes text while it is still being written and returns audio as it is generated. Send input_text_buffer.append events, then input_text_buffer.commit, or session.finish to end the session.
• Audio arrives in response.audio.delta events: 16-bit PCM at 24,000 Hz by default, or MP3 or Opus. Set the voice, instruction, format and other options with session.update; a change applies from the next segment.
• Text is spoken in segments that end at sentence boundaries, and each segment ends with a response.done event carrying its usage.

Billing

• Input tokens are the text, and output tokens are the generated audio at 12.5 tokens per second.
• Speed and pitch change the length of the rendered audio but not the billed tokens. An instruction that slows the delivery adds output tokens.

How to call Qwen Audio 3.1 TTS Plus and Qwen Audio 3.1 TTS

Qwen Audio 3.1 TTS Plus serves speech through POST /v1/audio/speech and returns playable audio. Send the text to speak as input with the model id qwen-audio-3-1-tts-plus. Both models are called through the same endpoint. Set model to qwen-audio-3-1-tts-plus or qwen-audio-3-1-tts. Get an API key from the EmpirioLabs dashboard.

curl https://api.empiriolabs.ai/v1/audio/speech \
  -H "Authorization: Bearer $EMPIRIOLABS_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "model": "qwen-audio-3-1-tts-plus",
    "input": "Welcome to EmpirioLabs. Your build just finished."
  }' \
  --output speech.mp3

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS: tests and guides

Prompt tests and comparison runs that cover both models.

Guides Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS vs Gemini 2.5 Pro TTS vs StepAudio 3 TTS: one narration We gave Qwen Audio 3.1 TTS Plus, Qwen Audio 3.1 TTS, Gemini 2.5 Pro TTS and StepAudio 3 TTS the same narration and...

Qwen Audio 3.1 TTS Plus vs Qwen Audio 3.1 TTS: common questions

What is the difference between Qwen Audio 3.1 TTS Plus and Qwen Audio 3.1 TTS?

Qwen Audio 3.1 TTS Plus is the newer release (Oct 21, 2026); Qwen Audio 3.1 TTS was released on Sep 23, 2026. Capabilities listed only for Qwen Audio 3.1 TTS: low latency. The specs, rate cards, and parameters on this page come from the live EmpirioLabs catalog.

Which is newer, Qwen Audio 3.1 TTS Plus or Qwen Audio 3.1 TTS?

Qwen Audio 3.1 TTS Plus is the newer release (Oct 21, 2026); Qwen Audio 3.1 TTS was released on Sep 23, 2026.

Which has the lower rate, Qwen Audio 3.1 TTS Plus or Qwen Audio 3.1 TTS?

The two models are priced on different units or tiers, so compare the live rate cards on this page. They always match what the API charges.

Can I switch between Qwen Audio 3.1 TTS Plus and Qwen Audio 3.1 TTS without rebuilding my integration?

Yes. Both models use POST /v1/audio/speech with the same EmpirioLabs API key, so most integrations switch by changing the model value. Check the parameters table on this page first if you rely on a model-specific parameter.

Can I try Qwen Audio 3.1 TTS Plus and Qwen Audio 3.1 TTS in the browser before integrating?

Yes. Open each model in the EmpirioLabs playground and press Start session to try it in your browser.